123 lines
14 KiB
XML
123 lines
14 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
||
|
||
<CONFIG>
|
||
<!--name module macro name -->
|
||
<!--value indicates whether this feature is supported -->
|
||
<!--open_source indicates whether open source -->
|
||
<!--path directory where the module is -->
|
||
<!--net_attr Network configuration, optional value all/separate, separate means to distinguish CCO/STA multiple compilation, all means to compile only once -->
|
||
<!--lib_name indicates the library name corresponding to this module -->
|
||
<!--include_name indicates the external interface description provided by this module -->
|
||
<!--inner_include_name indicates the inter-module interface description provided by this module -->
|
||
<!--is_dyn means dynamic loading or fixed storage. If no is selected, it means fixed storage, the library name extension needs to be *.o; if yes, it means dynamic loading, the library name extension is *.a-->
|
||
<MODULE name="EXT_MODULE_MODULE_APP" value="yes" open_source="yes" path="app/module_app" net_attr="separate" lib_name="libmodule_app.a" include_name="soc_mdm_module_app.h" inner_include_name="soc_inner_module_app.h" is_dyn="yes" help="">
|
||
<item type="0x1" name = "PRODUCT_CFG_DEBUG_JTAG_LED_MODULE_APP" value = "no" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_DEBUG_CRASH_MODULE_APP" value = "no" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_FAST_SEND_DEMO" value = "no" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PLC_MODULE_APP_TEST" value = "no" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_SDK_WHTIE_LIST_SUPPORT" value = "no" depends ="" help="" ></item>
|
||
<DEV name="PRODUCT_CFG_PRODUCT_TYPE_CCO">
|
||
<!--partition table 分区表配置-->
|
||
<!-- Start address and size of BOOT. Influences:layout of the burning file. CNComments:BOOT起始地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_BOOT_ST_ADDR" value = "0x0" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_BOOT_SIZE" value = "0x4000" depends ="" help="" ></item>
|
||
<!-- Start address and size of factory NV space 1. Influence:layout of the burning file. CNComments:描述:工厂区NV区1起始地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM1_ST_ADDR" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM1_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<!-- Start address and size of factory NV space 2. Influence:layout of the burning file. CNComments:描述:工厂区NV区2起始地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM2_ST_ADDR" value = "0x5000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM2_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<!-- Start address and size of NV file backup. Influence:layout of the burning file. CNComments:描述:NV原文件起始地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_FILE_ST_ADDR" value = "0x6000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_FILE_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<!-- Start address and size of kernel, DO NOT change the start address. Influence:layout of the burning file. CNComments:描述:Kernel起始地址与大小。影响:烧片文件布局。注意不要修改kernel起始地址 -->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_KERNEL_ST_ADDR" value = "0x7000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_KERNEL_SIZE" value = "0x46000" depends ="" help="" ></item>
|
||
<!-- Start address and size of upg file backup. Influence:layout of the burning file. CNComments:描述:升级备份区地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_UPG_ST_ADDR" value = "0x4D000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_UPG_SIZE" value = "0x2C000" depends ="" help="" ></item>
|
||
<!-- Start address and size of work NV space. Influence:layout of the burning file. CNComments:描述:NV工作区地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_WORK_ST_ADDR" value = "0x79000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_WORK_SIZE" value = "0x2000" depends ="" help="" ></item>
|
||
<!-- Start address and size of user space. Influence:layout of the burning file. CNComments:描述:用户区地址与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_USER_ST_ADDR" value = "0x7B000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_USER_SIZE" value = "0x4000" depends ="" help="" ></item>
|
||
<!-- Start address and size of crash information logging. Influence:layout of the burning file. CNComments:描述:用户空间死机信息与大小。影响:烧片文件布局。-->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_CRASH_ST_ADDR" value = "0x7F000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_CRASH_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
|
||
<!--partition table version control. CNComments:分区表版本控制配置-->
|
||
<!--partition table version support switch. CNComments:分区表版本控制开关 -->
|
||
<item type="0x1" name = "PARTITION_VER_CTL_SUPPORT_ENABLE" value = "0x1" depends ="" help="" ></item>
|
||
<!--partition table version number, value MUST increase. CNComments:分区表版本号，使用时必须是原有版本号递增 -->
|
||
<item type="0x1" name = "PARTITION_VER_CTL_NUM" value = "0x2" depends ="" help="" ></item>
|
||
<!--partition table version compatible bit map. CNComments:分区表版本号，位或的方式表示支持升级的版本，与各版本的bit_map位与，如果结果非0表示支持对该版本的升级兼容。 -->
|
||
<item type="0x1" name = "PARTITION_VER_CTL_COMPATIBLE" value = "0x3" depends ="" help="" ></item>
|
||
|
||
<!--partition table transfer control .CNComments:分区表搬运控制-->
|
||
<!--partition table transfer logging control. when it is open, PRODUCT_CFG_PARTITION_LOG_TEMP_ADDR take effect. CNComments:分区表搬运日志开关，开启时，PRODUCT_CFG_PARTITION_LOG_TEMP_ADDR生效 -->
|
||
<item type="0x1" name = "PARTITION_TRANS_LOG_ENABLE" value = "0x0" depends ="" help="" ></item>
|
||
<!--partition table transfer ID which is wait to modify. (correspond to enum soc_flash_partition_table_e).The order is move order. If the scene is backward expansion space, the address moving from high to low will not result in data loss. CNComments:待修改分区ID（对应枚举soc_flash_partition_table_e），其顺序为搬移顺序，如果场景为向后扩展空间，则采用地址从高到低搬移不会产生数据丢失。-->
|
||
<item type="0x1" name = "PARTITION_TRANS_TB_ID" value = "6,5,4" depends ="" help="" ></item>
|
||
<!--partition table transfer logging address.8K is required. The end space of the user area is used by default. When it is turned on, the power failure handling is prevented. CNComments:存储搬移日志的地址，需要8k, 默认使用用户区末端空间，当开启时，防止掉电搬运失败 -->
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_LOG_TEMP_ADDR" value = "0x7D000" depends ="" help="" ></item>
|
||
</DEV>
|
||
<DEV name="PRODUCT_CFG_PRODUCT_TYPE_STA">
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_BOOT_ST_ADDR" value = "0x0" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_BOOT_SIZE" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM1_ST_ADDR" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM1_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM2_ST_ADDR" value = "0x5000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM2_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_FILE_ST_ADDR" value = "0x6000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_FILE_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_KERNEL_ST_ADDR" value = "0x7000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_KERNEL_SIZE" value = "0x46000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_UPG_ST_ADDR" value = "0x4D000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_UPG_SIZE" value = "0x2C000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_WORK_ST_ADDR" value = "0x79000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_WORK_SIZE" value = "0x2000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_USER_ST_ADDR" value = "0x7B000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_USER_SIZE" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_CRASH_ST_ADDR" value = "0x7F000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_CRASH_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<!--partition table version control. CNComments:分区表版本控制配置-->
|
||
<item type="0x1" name = "PARTITION_VER_CTL_SUPPORT_ENABLE" value = "0x1" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PARTITION_VER_CTL_NUM" value = "0x2" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PARTITION_VER_CTL_COMPATIBLE" value = "0x3" depends ="" help="" ></item>
|
||
<!--partition table transfer control. CNComments:分区表搬运控制-->
|
||
<item type="0x1" name = "PARTITION_TRANS_LOG_ENABLE" value = "0x0" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PARTITION_TRANS_TB_ID" value = "6,5,4" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_LOG_TEMP_ADDR" value = "0x7D000" depends ="" help="" ></item>
|
||
</DEV>
|
||
<DEV name="PRODUCT_CFG_PRODUCT_TYPE_NDM">
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_BOOT_ST_ADDR" value = "0x0" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_BOOT_SIZE" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM1_ST_ADDR" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM1_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM2_ST_ADDR" value = "0x5000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_FTM2_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_FILE_ST_ADDR" value = "0x6000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_FILE_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_KERNEL_ST_ADDR" value = "0x7000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_KERNEL_SIZE" value = "0x46000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_UPG_ST_ADDR" value = "0x4D000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_UPG_SIZE" value = "0x2C000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_WORK_ST_ADDR" value = "0x79000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_NV_WORK_SIZE" value = "0x2000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_USER_ST_ADDR" value = "0x7B000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_USER_SIZE" value = "0x4000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_CRASH_ST_ADDR" value = "0x7F000" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_CRASH_SIZE" value = "0x1000" depends ="" help="" ></item>
|
||
<!--partition table version control CNComments:分区表版本控制配置-->
|
||
<item type="0x1" name = "PARTITION_VER_CTL_SUPPORT_ENABLE" value = "0x1" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PARTITION_VER_CTL_NUM" value = "0x2" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PARTITION_VER_CTL_COMPATIBLE" value = "0x3" depends ="" help="" ></item>
|
||
<!--partition table transfer control CNComments:分区表搬运控制-->
|
||
<item type="0x1" name = "PARTITION_TRANS_LOG_ENABLE" value = "0x0" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PARTITION_TRANS_TB_ID" value = "6,5,4" depends ="" help="" ></item>
|
||
<item type="0x1" name = "PRODUCT_CFG_PARTITION_LOG_TEMP_ADDR" value = "0x7D000" depends ="" help="" ></item>
|
||
</DEV>
|
||
</MODULE>
|
||
</CONFIG>
|