323 lines
16 KiB
C
323 lines
16 KiB
C
|
/*
|
||
|
|
* Copyright (c) CompanyNameMagicTag 2021-2021. All rights reserved.
|
||
|
|
* Description: NV-Related IDs and Structure Definitions
|
||
|
|
*/
|
||
|
|
/* NV ID */
|
||
|
|
#ifndef NV_SOC_MAC_NV_VALUE_DEF_H
|
||
|
|
#define NV_SOC_MAC_NV_VALUE_DEF_H
|
||
|
|
|
||
|
|
#include "soc_types.h"
|
||
|
|
#include "soc_phy_nv.h"
|
||
|
|
|
||
|
|
typedef td_u16 id_diag_config;
|
||
|
|
|
||
|
|
#define ID_DIAG_CMD_CONFIG_IF 0x40 /* Frame interval parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_TIMEOUT_ON_PRI 0x41 /* Packet Expiration Time */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_BUFFER_PERCENT_ON_PRI 0x42 /* Size of the sending queue */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_LED_NV 0x43 /* Light control module parameters */
|
||
|
|
#define ID_DIAG_CMD_NDM_PIPE_NV 0x44 /* Reader channel parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_ASSOC_CONFIG 0x45 /* Associated parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_PHASE_ATTR 0x46 /* Phase module parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_TDMA_CONFIG 0x47 /* TDMA scheduling parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_ROUTE_ATTRIB 0x48 /* Route evaluation parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_TX_CSMA_ALGORITHM 0x49 /* CSMA backoff parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_TX_SOF_TMI_POLICY 0x50 /* TMI sending policy parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_BEACON_TMI 0x51 /* Beacon frame TMI selection parameter */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_DFX_CONFIG 0x52 /* Maintainability and Testability Switch Parameters */
|
||
|
|
#define ID_DIAG_CMD_BEACON_SLOT_CONFIG 0x53 /* Beacon timeslot parameters */
|
||
|
|
#define ID_DIAG_CMD_FILTER_SWITCH_CONFIG 0x54 /* Packet filtering switch parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_STA_BLIND_CHECK 0x55 /* Frequency band blind detection parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_NDM_CONNECT_PARA 0x56 /* Reader connection parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_RT_CYCLE_SELF_ADAPT_PARA 0x57 /* Routing period parameters */
|
||
|
|
#define ID_DIAG_CMD_STA_GPIO_NV 0x58 /* GPIO pin configuration parameters and key node \
|
||
|
|
* positioning parameters of the STA \
|
||
|
|
*/
|
||
|
|
#define ID_DIAG_CMD_CONFIG_MULTI_EXCEPTION_NV 0x59 /* Multi-network exception detection parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_COMM_RATE 0x60 /* Communication rate reporting parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_DUTY_PARA_CONFIG 0x62 /* Duty cycle control parameter (for test) */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_EMC_PARA 0x63 /* EMC certification parameters */
|
||
|
|
#define ID_DIAG_CMD_NTB_PARA 0x64 /* V200-NTB parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_COORDINATE_CONFIG 0x65 /* Multi-network coordination parameters */
|
||
|
|
#define ID_DIAG_CMD_CONFIG_ROUTE_PROXY 0x66 /* Static Route Configuration */
|
||
|
|
#define ID_DIAG_CMD_MULTI_NETWORK_ASSOC_CONFIG 0x67 /* Multi-network association parameters */
|
||
|
|
#define ID_DIAG_CMD_TF_CONFIG 0x68 /* Transformer district identification NV */
|
||
|
|
#define ID_DIAG_CMD_P2P_CTRL_CONFIG 0x69 /* P2P Configuration */
|
||
|
|
#define ID_DIAG_CMD_CFG_PI_CONFIG 0x70 /* phase identification parameter */
|
||
|
|
#define ID_DIAG_CMD_SECURITY_CONFIG 0x71 /* Protocol security parameters */
|
||
|
|
/* Maximum NV. The value must be changed accordingly. Otherwise, the registration fails. */
|
||
|
|
#define ID_DIAG_CMD_MAC_NV_MAX ID_DIAG_CMD_SECURITY_CONFIG
|
||
|
|
|
||
|
|
/* NV setting */
|
||
|
|
#define SNR_TRANS_CLASS_NUM 8 /* Number of transmission SNR layers */
|
||
|
|
#define SNR_COLLECT_CLASS_NUM 16 /* Count the number of SNR levels. */
|
||
|
|
|
||
|
|
#define SNR_FAST_ACCURATE_TH_NUM 4 /* Number of high precision thresholds for fast convergence */
|
||
|
|
#define SNR_FAST_ACCURATE_AVG_PECISION 10 /* Accuracy of the average SNR of the high precision \
|
||
|
|
* threshold for fast convergence \
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef enum {
|
||
|
|
MAC_IFS_FREQ_TRY_ORDER_OTHER_INDEX = 0,
|
||
|
|
MAC_IFS_FREQ_TRY_ORDER2_INDEX,
|
||
|
|
MAC_IFS_FREQ_TRY_ORDER3_INDEX,
|
||
|
|
MAC_IFS_FREQ_TRY_MAX_INDEX = 3,
|
||
|
|
} diag_mac_ifs_cfg_index;
|
||
|
|
|
||
|
|
#define TX_CSMA_BACKOFF_BC_TABLE_ITEMS 20
|
||
|
|
#define TX_CSMA_BACKOFF_DBC_TABLE_ITEMS 8
|
||
|
|
#define TX_CSMA_BACKOFF_BFC_TABLE_ITEMS 8
|
||
|
|
#define TX_CSMA_BACKOFF_DBC_MAX_TIME 20 /* Empirical values need to be obtained through tests. */
|
||
|
|
#define TX_CSMA_BACKOFF_BC_DEFAULT_SLOT_MULTI 5
|
||
|
|
#define TX_CSMA_BACKOFF_BC_CCO_SLOT_MULTI 2
|
||
|
|
|
||
|
|
#ifdef SAL_HAVE_FEATURE_UT
|
||
|
|
#define ID_DIAG_CMD_MAC_WHITE_ITEM_MAX 150
|
||
|
|
#else
|
||
|
|
/*
|
||
|
|
* 2048. The DBK uses this value, which is associated with
|
||
|
|
* EXT_MAC_VALID_MAC_LIST_MAX and EXT_BIDB_ITEM_NUM_MAX.
|
||
|
|
*/
|
||
|
|
#define ID_DIAG_CMD_MAC_WHITE_ITEM_MAX 64
|
||
|
|
|
||
|
|
typedef struct {
|
||
|
|
td_u8 static_proxy_mac[EXT_PLC_MAC_ADDR_LEN]; /* Specifies the static relay MAC address. */
|
||
|
|
td_bool my_static_proxy_exist; /* Whether to set a specified static trunk. */
|
||
|
|
td_bool to_be_static_repeater; /* Indicates whether the local site is
|
||
|
|
* a static regeneration site.
|
||
|
|
*/
|
||
|
|
} diag_cmd_config_route_proxy_stru;
|
||
|
|
|
||
|
|
/* *
|
||
|
|
* 1.4 Setting the timeout period of packets with different priorities
|
||
|
|
*/
|
||
|
|
typedef struct {
|
||
|
|
td_u32 timeout : 24; /* Timeout */
|
||
|
|
td_u32 priorty : 8; /* Priority */
|
||
|
|
} diag_cmd_config_timeout_on_pri_entry_stru;
|
||
|
|
|
||
|
|
#define ID_DIAG_CMD_CONFIG_TIMEOUT_ON_PRI_ENTRY_COUNT 10
|
||
|
|
|
||
|
|
typedef struct _diag_cmd_config_timeout_on_pri_stru_ {
|
||
|
|
td_u8 num; /* Set the number of items (n). */
|
||
|
|
td_u8 pad[3]; /* Reserved 3 bytes */
|
||
|
|
/* Setting item entity */
|
||
|
|
diag_cmd_config_timeout_on_pri_entry_stru entry[ID_DIAG_CMD_CONFIG_TIMEOUT_ON_PRI_ENTRY_COUNT];
|
||
|
|
} diag_cmd_config_timeout_on_pri_stru;
|
||
|
|
|
||
|
|
/* *
|
||
|
|
*
|
||
|
|
* 1.5 Ratio of buffers of different priorities
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
typedef struct {
|
||
|
|
td_u8 priorty; /* Queue Priority */
|
||
|
|
td_u8 cco_queue_size; /* Limit on the number of packets in a CCO queue */
|
||
|
|
td_u8 sta_queue_size; /* Limit on the number of packets in a STA queue */
|
||
|
|
td_u8 pad;
|
||
|
|
} diag_cmd_config_buffer_percent_on_pri_entry_stru;
|
||
|
|
|
||
|
|
#define ID_DIAG_CMD_CONFIG_BUFFER_PERCENT_ON_PRI_ENTRY_COUNT 10
|
||
|
|
|
||
|
|
typedef struct _diag_cmd_config_buffer_percent_on_pri_stru_ {
|
||
|
|
td_u8 num;
|
||
|
|
td_u8 pad[3]; /* Reserved 3 bytes */
|
||
|
|
diag_cmd_config_buffer_percent_on_pri_entry_stru entry[ID_DIAG_CMD_CONFIG_BUFFER_PERCENT_ON_PRI_ENTRY_COUNT];
|
||
|
|
} diag_cmd_config_buffer_percent_on_pri_stru;
|
||
|
|
|
||
|
|
/* *
|
||
|
|
*
|
||
|
|
* 1.8 Setting the MAC address whitelist (for CCO and association requests)
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
typedef struct _diag_cmd_config_route_attrib_stru_ {
|
||
|
|
/*
|
||
|
|
* This parameter is not used currently.
|
||
|
|
* Use the adaptive evaluation period parameter.
|
||
|
|
*/
|
||
|
|
td_u16 rt_evaluate_cycle_time_len;
|
||
|
|
td_bool is_evaluate_proxy_before_join_chl; /* Enable Proxy Evaluation Before Network Access
|
||
|
|
* Based on Channel Quality
|
||
|
|
*/
|
||
|
|
td_u8 rt_down_comm_rate_basic_limit; /* Basic threshold of the downlink communication rate */
|
||
|
|
|
||
|
|
td_u8 rt_up_comm_rate_basic_limit; /* Basic threshold of the uplink communication rate */
|
||
|
|
td_u8 rt_choose_proxy_upper_limit; /* Max. Proxy Selection Communication Rate */
|
||
|
|
td_u8 rt_choose_proxy_lower_limit; /* Lower limit of agent selection communication rate */
|
||
|
|
td_u8 rt_continue_better_th; /* The agent selection is continuously better than the change threshold. */
|
||
|
|
|
||
|
|
td_u8 rt_high_diff; /* Upper limit change threshold */
|
||
|
|
td_u8 rt_middle_diff; /* Threshold for changing the upper and lower thresholds */
|
||
|
|
td_u8 rt_low_diff; /* Lower Change Threshold */
|
||
|
|
td_u8 is_path_table_dfx_enable; /* Path Beacon Table Maintenance Switch */
|
||
|
|
|
||
|
|
td_u32 rt_proxy_far_near_alg_switch : 1; /* Proxy Layer Near- and Far-End Identification Algorithm Switch */
|
||
|
|
td_u32 rt_stat_beacon_switch : 1; /* Use Beacon Frames as the Basis for
|
||
|
|
* Communication Rate Statistics
|
||
|
|
*/
|
||
|
|
td_u32 rt_far_or_near_alg_swith : 1; /* Algorithm Switch for Identifying Near- and Far-End Layers */
|
||
|
|
td_u32 rt_lower_level_switch : 1; /* You can select a lower-layer discovery
|
||
|
|
* site as the candidate proxy switch.
|
||
|
|
*/
|
||
|
|
td_u32 rt_channel_info_switch : 1; /* Channel Capacity Used as Entry Condition for Proxy Evaluation */
|
||
|
|
/*
|
||
|
|
* Indicates whether to disable the function of
|
||
|
|
* limiting the uplink communication rate.
|
||
|
|
*/
|
||
|
|
td_u32 rt_up_comm_rate_redundancy_switch : 1;
|
||
|
|
/*
|
||
|
|
* The site with a low communication rate is
|
||
|
|
* not selected as the candidate proxy switch.
|
||
|
|
*/
|
||
|
|
td_u32 rt_less_than_lower_limit_switch : 1;
|
||
|
|
/*
|
||
|
|
* When the proxy communication rate is higher than the
|
||
|
|
* upper limit, you can select a site with a higher
|
||
|
|
* communication rate as the proxy switch.
|
||
|
|
*/
|
||
|
|
td_u32 rt_more_than_upper_limit_switch : 1;
|
||
|
|
td_u32 rt_mult_path_switch : 1; /* Multipath Evaluation Switch */
|
||
|
|
td_u32 rt_get_multi_path_switch : 1; /* Obtaining the Multipathing Switch */
|
||
|
|
td_u32 rt_snr_diff : 8;
|
||
|
|
td_u32 pad_1 : 14;
|
||
|
|
|
||
|
|
td_bool rt_convergence_flag; /* Route Aggregation Switch Flag */
|
||
|
|
/*
|
||
|
|
* Minimum period for sending beacons intensively and
|
||
|
|
* collecting communication rate data quickly, in seconds.
|
||
|
|
*/
|
||
|
|
td_u8 min_first_evaluate_period;
|
||
|
|
td_u8 rt_proxy_send_discovery_pk_len; /* Interval for the agent to send the discovery list, in seconds. */
|
||
|
|
td_u8 rt_sta_send_discovery_pk_len; /* Interval at which a common site sends the discovery list (unit: s) */
|
||
|
|
|
||
|
|
td_u8 slide_window_weight[4]; /* 4 Window Weight */
|
||
|
|
|
||
|
|
td_bool is_star_disc_enable; /* Display Enable Flag in Star Network Discovery List */
|
||
|
|
td_u8 enforcing_proxy_change_enable; /* Whether forcible proxy change is enabled */
|
||
|
|
td_u16 enforcing_proxy_change_cycle; /* Specifies the forcible proxy change period, in minutes. */
|
||
|
|
} diag_cmd_config_route_attrib_stru;
|
||
|
|
|
||
|
|
#define RT_CYCLE_PARA_CNT 6
|
||
|
|
|
||
|
|
typedef struct _diag_cmd_config_rt_cycle_seif_adaptive_attrib_str_ {
|
||
|
|
td_u16 station_cnt; /* Number of sites */
|
||
|
|
td_u16 evaluate_cycle_len; /* Indicates the evaluation period, in seconds. */
|
||
|
|
|
||
|
|
td_u8 proxy_send_dk_cycle_len; /* This object indicates the frequency at which the proxy
|
||
|
|
* station sends discovery list packets, in seconds.
|
||
|
|
*/
|
||
|
|
td_u8 sta_send_dk_cycle_len; /* Interval at which the discovery site sends discovery list packets,
|
||
|
|
* in seconds.
|
||
|
|
*/
|
||
|
|
td_u8 pad[2]; /* Reserved 2 bytes */
|
||
|
|
} diag_cmd_config_rt_cycle_seif_adaptive_attrib_str;
|
||
|
|
|
||
|
|
typedef struct _diag_cmd_config_route_adaptive_attrib_stru_ {
|
||
|
|
/*
|
||
|
|
* Number of sites on the network. The value 0 indicates that parameters
|
||
|
|
* are dynamically selected based on the number of sites on the network.
|
||
|
|
*/
|
||
|
|
td_u16 rt_policy;
|
||
|
|
td_u16 adaptive_redundance_para; /* Periodic adaptive parameter redundancy,
|
||
|
|
* preventing periodic parameter instability
|
||
|
|
*/
|
||
|
|
td_u8 multi_net_flag;
|
||
|
|
td_u8 pad[3]; /* Reserved 3 bytes */
|
||
|
|
diag_cmd_config_rt_cycle_seif_adaptive_attrib_str cycle_self_adaptive[RT_CYCLE_PARA_CNT];
|
||
|
|
} diag_cmd_config_route_adaptive_attrib_stru;
|
||
|
|
|
||
|
|
/* Reader channel parameter configuration */
|
||
|
|
typedef struct {
|
||
|
|
td_u16 fragment_sleep_time; /* Time of waiting for the failure to obtain the MacBuffer of the packet data */
|
||
|
|
td_u8 fragment_resend_cnt; /* Maximum number of retransmissions when
|
||
|
|
* the packet data fails to obtain the MACBuffer
|
||
|
|
*/
|
||
|
|
td_u8 fc_pkt_num_max_per_req; /* Maximum number of response packets in each request
|
||
|
|
* in the flow control channel.
|
||
|
|
*/
|
||
|
|
|
||
|
|
td_s16 proxy_snr_threshold; /* Indicates the average SNR threshold of the proxy site used by the NCR. */
|
||
|
|
td_u16 fc_rsp_wait_timer_period; /* Maximum waiting time for response timeout */
|
||
|
|
|
||
|
|
td_u32 fc_req_wait_timer_period; /* Maximum processing time of a request */
|
||
|
|
|
||
|
|
td_u8 fc_send_times_per_req; /* Number of times that each request packet is sent */
|
||
|
|
td_u8 fc_send_times_per_rsp; /* Number of times that each response packet is sent */
|
||
|
|
td_u8 ndm_remote_send_switch; /* Indicates whether to enable the non-IP communication on the NCR.
|
||
|
|
* 1: enabled; 0: disabled.
|
||
|
|
*/
|
||
|
|
td_u8 pad;
|
||
|
|
} diag_cmd_config_ndm_pipe_nv_stru;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Frame interval configuration
|
||
|
|
*/
|
||
|
|
typedef struct _diag_cmd_config_if_stru_ {
|
||
|
|
td_u16 pifs[MAC_IFS_FREQ_TRY_MAX_INDEX]; /* Unit: us */
|
||
|
|
td_u16 rifs[MAC_IFS_FREQ_TRY_MAX_INDEX]; /* Unit: us */
|
||
|
|
td_u16 cifs[MAC_IFS_FREQ_TRY_MAX_INDEX]; /* Unit: us */
|
||
|
|
td_u16 bifs[MAC_IFS_FREQ_TRY_MAX_INDEX]; /* Unit: us */
|
||
|
|
|
||
|
|
td_u16 eifs[FREQ_MAX_CNT]; /* Unit: ms */
|
||
|
|
|
||
|
|
td_u16 ack_delay_durtion; /* Indicates the time for responding to the SACK packet.
|
||
|
|
* The default value is 60 us.Unit: us
|
||
|
|
*/
|
||
|
|
td_u16 time_redundancy; /* Unit: us */
|
||
|
|
|
||
|
|
td_u8 slot_dfx_switch; /* Timeslot Maintenance Switch */
|
||
|
|
td_u8 pad1;
|
||
|
|
td_u16 mesh_delay;
|
||
|
|
} diag_cmd_config_if_stru;
|
||
|
|
|
||
|
|
typedef struct {
|
||
|
|
td_u16 nbi_start;
|
||
|
|
td_u16 nbi_end;
|
||
|
|
} diag_cmd_config_avoid_freq_entry;
|
||
|
|
|
||
|
|
typedef struct {
|
||
|
|
td_bool emc_switch; /* EMC authentication switch */
|
||
|
|
td_u8 report_static_cyc;
|
||
|
|
td_u8 avoid_freq_num; /* Number of frequency bands for dynamic avoidance */
|
||
|
|
td_u8 avoid_freq_mask_extend; /* Number of extended subcarriers for dynamic frequency avoidance */
|
||
|
|
/*
|
||
|
|
* After the frequency interference disappears,
|
||
|
|
* the avoidance duration needs to be extended. The unit is second.
|
||
|
|
*/
|
||
|
|
td_u16 freq_avoid_extend_time;
|
||
|
|
td_u16 power_control_pk_cycle; /* Power control packet period, in seconds. */
|
||
|
|
|
||
|
|
td_u16 emc_periodic_detect_cycle; /* EMC detection period, in milliseconds. */
|
||
|
|
td_u8 send_fail_th_power_recovery; /* Threshold for packet transmission failures during power recovery */
|
||
|
|
td_u8 power_adjust_step; /* Power Adjustment Step */
|
||
|
|
|
||
|
|
td_u8 max_channel_dec_thresh; /* Maximum channel attenuation */
|
||
|
|
td_u8 min_channel_dec_thresh; /* Maximum channel attenuation */
|
||
|
|
td_u8 white_noise_detect_th; /* White Noise Scenario Threshold */
|
||
|
|
td_u8 is_enable_lab_nbi_judge; /* Whether to enable the NBI judgment threshold in the lab */
|
||
|
|
|
||
|
|
td_u8 fft_num_th;
|
||
|
|
td_u8 power_control_nv_switch; /* Power Control Switch */
|
||
|
|
td_u8 send_fail_recovery_power_switch; /* Power Control Triggered by Transmission Failure */
|
||
|
|
td_u8 noise_pow_target; /* noise target power */
|
||
|
|
|
||
|
|
td_u8 powerloading_merge_th; /* Slot combination threshold */
|
||
|
|
td_u8 lab_nbi_judge_th; /* Threshold for the number of consecutive
|
||
|
|
* confirmation times in the NBI lab scenario
|
||
|
|
*/
|
||
|
|
td_u8 lab_nbi_max; /* NBI Threshold for Determining a Lab Scenario */
|
||
|
|
td_u8 default_afe_power; /* Default AFE power in EMC mode: 8 */
|
||
|
|
|
||
|
|
td_u32 test_pk_cycle;
|
||
|
|
|
||
|
|
td_u16 test_pk_size;
|
||
|
|
td_u8 test_pk_num; /* Indicates the number of test packets sent per second. */
|
||
|
|
td_u8 avoid_detect_th; /* Dynamic Frequency Avoidance Detection Times Threshold */
|
||
|
|
|
||
|
|
td_u16 sat_num_th;
|
||
|
|
td_u16 pad1;
|
||
|
|
|
||
|
|
diag_cmd_config_avoid_freq_entry freq[5]; /* frequency band entry is of 5 items */
|
||
|
|
} diag_cmd_config_emc_para_stru;
|
||
|
|
#endif
|
||
|
|
#endif
|